SpiraPave®

Installation

• Measure the total area to determine the number of bearers required. One SpiraPave pedestal is required for each linear metre of bearer to be supported.
• Position SpiraPave pedestals with a Slope Corrector and a Bearer Holder at required intervals.
• Adjust the 0-5% slope corrector to compensate for any falls in the slab
• Position on bearers and adjust the SpiraPave pedestal either up or down so that the bearer is level.
• Screw the bearer into the eyelet in the wing of the Bearer Holder.
• Anchor bearers to all perimeter walls using metal brackets.
• Install timber slats or rails onto bearers.

SpiraPave pedestals support decking and flooring
on balconies and other building structures