VersiPave® GP
Installation
VersiPave GP consists of a circular base divided into quadrants. Each pedestal has a 24 mm high raised rectangular support.
Where required, the height of each support is adjustable in increments of approximately 1 mm up to 34 mm high and is easily extended up to 150 mm using proprietary 10 mm and 30 mm VersiPave GP Extenders.
- Measure the total area to be paved to determine the number of pavers
and VersiPave GP required. - One VersiPave GP unit is required for each paver to be supported
- Mark the intersection of the corners of each paver to be laid
- Pack up to leveling line with VersiPave Extenders, if necessary
- Where free edges and corners are to be supported, break the
VersiPave GP along the quadrant line - Place VersiPave GP units on the positions marked out on the surface
to be paved - Place the pavers into place on each VersiPave GP and simply adjust
the chocks on the supports to ensure each paver is level
VersiPave GP are used for raised floor systems on
balconies and other building structures
